Table of Contents
Advertisement
SecurityPhone.book 30 ページ ２００４年７月２１日 水曜日 午後６時５８分
Security Codes & Authority Levels
Access Group
You can assign users to a group (1 to 8) and select the access group for "Schedule"
mode.
Refer to "Access group" on page 31 in the 3000EN Security Systems User's Guide.
While the security system is armed, you can not turn on this function. To turn
on, disarm the security system (p. 12).
Make sure all perimeter doors and windows are closed and
displayed.
Base Unit
Press [ADT].
1
Scroll to "OTHER FUNCTIONS" by pressing [d]
2
or [B], then press [g].
Scroll to "USER CODES" by pressing [d] or [B],
3
then press [g].
Scroll to "ACCESS GROUP" by pressing [d] or
4
[B], then press [g].
Enter your security code.
5
Enter the user number of 2 digits, then press
6
[g] (ENTER).
(Ex. To select user number 8, enter "08".)
7
Enter the access group number (1 to 8).
(Ex. To assign group number 1, press [1].)
Press [g] (ENTER).
8
• If a confirmation tone (one beep) is not heard, you
entered the wrong security code in step 5 or wrong
user number in step 6. The setting is not saved. If
the system is wrongly armed, disarm the system,
and try again.
30
is
READY
OTHER FUNCTIONS
g
USER CODES
g
ACCESS GROUP
g
ENTER CODE
----
Enter User #
-,-
Example
Enter User #
0,8
=ENTER
READY
g
Access Grp (1-8)
-
Example
Access Grp (1-8)
1
=ENTER
READY
g
Advertisement
Chapters
Table of Contents
