User Access - Panasonic K10059 User Manual

SecurityPhone.book 37 ページ ２００４年７月２１日 水曜日 午後６時５８分
To continue with creating schedules,
7
repeat from step 5.
To finish creating schedules,
wait for 30 seconds, then press [STOP] to go
to the standby mode.
Handset
: Press the soft key (
previous page, using the cordless handset. Press [OFF] to go to the
standby mode.
• To exit the menu, wait for 30 seconds, then press [STOP] or [OFF].
Event Table
Event No. Display
00
Clear Event
01
Relay Event
02

User Access

03
Latch Key
04
Forced Stay
05
Forced Away
06
Auto Disarm
07
Dsp Reminder
), and follow steps 2 to 6 on the
ADT
Description
clears the stored event.
turns a programmed output on or off.
sets a user access schedule for one or
more users.
send a "latch-key" ("777-7777") report to a
pager if the system is not disarmed by a
specified time.
automatically sets the Stay mode at a
specified time.
automatically sets the Away mode at a
specified time.
automatically disarms the system at a
specified time.
displays "REMINDER" at a specified time.
Schedules
37