HP ProBook 6360b Maintenance And Service Manual page 111

Description
Fingerprint reader board assembly
Before removing the Fingerprint reader board assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5. Remove the following components:
a.
b.
c.
d.
e.
f.
g.
h.
i.
Remove the Fingerprint reader board assembly:
1.
Position the top cover upside-down, with the front toward you.
2. Remove the single Phillips PM2.5×3.0 screw (1) that secures the assembly to the top cover.
3. Slide the bracket (2) to remove the clips in top cover and lift off unit.
Downloaded from LpManual.com Manuals
Battery on page
Hard drive (see Hard drive on page
Optical drive (see Optical drive on page
Keyboard (see Keyboard on page
Modem module (see Modem module on page
Fan (see Fan on page 76)
Heat sink (see Heat sink on page
Base enclosure cover (see
Display assembly (see Display assembly on page
System board (see System board on page
50)
60)
57)
66)
72)
78)
Base enclosure cover on page
89)
96)
Spare part number
651913-001
82)
Component replacement procedures
103