Wireless/Web/Mute Function Board - HP ProBook 6360b Maintenance And Service Manual

d.
e.
f.
g.
h.
i.
Remove the Power button board assembly:
1.
Position the top cover upside-down, with the front toward you.
2. Remove the single Phillips PM2.5×3.0 screw (1) that secures the assembly to the top cover.
3. Remove the Power button board and cable (2) from the top cover.
Reverse this procedure to install the Power button board assembly.

Wireless/web/mute function board

NOTE:
Description
Wireless/web/mute function board assembly
Before removing the Wireless/web/mute function board assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
Downloaded from LpManual.com Manuals
Modem module (see Modem module on page
Fan (see Fan on page 76)
Heat sink (see Heat sink on page
Base enclosure cover (see
Display assembly (see Display assembly on page
System board (see System board on page
The Wireless/web/mute function board assembly spare includes the power button cable.
72)
78)
Base enclosure cover on page
89)
96)
82)
Spare part number
639480-001
Component replacement procedures
101