Heat Sink - HP ProBook 6360b Maintenance And Service Manual

Heat sink

All heat sink spare part kits include replacement thermal material.
Description
Heat sink (does not include fan)
Before removing the heat sink, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5. Remove the following components:
a.
Remove the bottom cover (see
b.
Fan (see
Remove the heat sink:
1.
Turn the computer upside-down, with the front toward you.
2. Remove the four Torx T8M2.0x8.0 screws (1) that secure the heat sink to the base enclosure.
78 Chapter 4 Removal and replacement procedures
Downloaded from LpManual.com Manuals
Battery on page
Bottom cover on page
Fan on page 76).
50).
51).
Spare part number
639475-001