Samsung SCX-82x0 series Service Manual page 283

● Error code :
A1-2111
A1-2113
● Symptom / Cause :
OPC motor does not operate.
OPC motor works but recognizes it with half status.
● Troubleshooting method :
1. Turn off the machine then turn on.
2. If the problem persists, check whether foreign subst
it.
3. Remove Rear-cover.
4. Check if the OPC motor connector is connected cor
(Refer to 3.8.1. Main drive motor)
Service Manual
7. Troubles shooting
● Error message :
Actuator Motor Failu re #A1-2111: Call for service if the problem persists.
Actuator Motor Failu re #A1-2113: Call for service if the problem persists.
tances are near OPC. If there are some debris, clean
rrectly.
BLDC C (OPC/DEVE)
7-A A-5
SAMSUNG ELECTRONICS