3.5.2 Draw connector
8. Pull out the harness to the indicator
direction. After removing 3 screws, take off
the bracket.
9. After removing 2 screws, take off the gear
assembly. y
10. Open the cover and remove the bracket.
10 O
h
Service Manual
3.Replacemen
d
h b
k
nt Procedure
12. Remove 2 screws. Pushing the hooks by
sharp pinses, remove the harnesses
CAUTION
When reassembling the pin connector, make sure
the colors are positioned as shown the left mark.
13. Pull out the harnesses to the direction of
arrow.
3-2
23
SAMSUNG ELECTRONICS