Dispenser - Saeco OTC SERIES Service Manual

INCANTO
Unscrew the screw
shown and remove
the cover.
Unscrew the screws shown
Remove the support KYB assy.
and disconnect the flat cable.
7.2.

Dispenser

Unscrew the screws shown and
remove the dispenser
Unscrew the screw shown Press the sides and remove the cover and
Remove the insert the upper cover
Remove the upper cover and remove the electrical and
water circuit connections.
dispenser. Insert as before to reassemble the
dispenser in the rail and then the coverage.
remove the block support
KYB assy.
unlock where highlighted and re-
move the cover in the dispenser
07 DISASSEMBLY
2/9