Saeco OTC SERIES Service Manual page 32

INCANTO
The first activation must make before you've paid up to 5000ml products because mind thinks as
if he had the filter
Filter num-
Hardness
ber
From 1/8 to
7/8
Indifferent
8/8
If after descaling or after the use of a filter this is not reactivated , the machine recognizes the water
hardness setting and calculates as in the table below
Hardness
1
Soft (up to 7°dH)
2 Medium (7° - 14°dH)
3 Hard (15° - 21°dH)
4
Very hard (over 21°dH)
The default water hardness level is 4. Each litre of water corresponds to approximately 2,000 pulses.
Descaling frequency in AQUACLEAN
Percentual on
display 10%
the icon flashes
slowly. (encourage
the consumer to
buy the filter)
8050ml
Descaling cycle frequency
WATER HARDNESS
Percentual on
display 0% the
icon flashes
quickly. (tell
the consumer
to change the
filter)
2000ml
75000ml only OTC
Without water filter
240 litres (480,000 pulses)
120 litres (240,000 pulses)
60 litres (120,000 pulses)
30 litres (60,000 pulses)
04 OPERATING LOGIC
MAX Quantity
water, the icon
turns off. (re-
place filter)
Replace filter (you
62500ml
can not turn off)
Not reactivating the filter
210 litres (420,000 pulses)
105 litres (210,000 pulses)
52.5 litres (105,000 pulses)
26.25 litres (52,500 pulses)
Descaling
10/10