Specifications - Saeco OTC SERIES Service Manual

INCANTO
2.1. Technical specifications
Power supply and output:
Temperature monitoring:
Safety system:
Coffee heat exchanger output:
Stainless steel
Gear motor:
Pump:
Overpressure valve:
Water filter:
Coffee grinder:
Automatic dosage:
Power consumption:
Dimensions: W x H x D in mm:
Dimensions (EXT): W x H x D in
mm:
Weight:
Water tank capacity:
Coffee bean hopper capacity:
Dreg drawer capacity:
Water circuit filling time:
Heating time:
Grinding time:
240 V~ 50 Hz 1850 W - 230 V~ 50/60 Hz 1850 W
120 V~ 60 Hz 1500 W
(NTC) variable resistor sensor - transmits the value to the
electronic card
2 thermostats at 190°C one shot
(230 V~) 1900 W - (120 V~) 1300 W - (100 V~) 1100 W
for coffee, hot water and steam dispensing
2 rotation directions; power supply 24VC
Ulka Type EP5/S GW approx. 13-15 bar with reciprocating
piston and thermal switch 100°C 48 W, 230V, 50 Hz, 120V,
60Hz 100V, 50/60 Hz
Opening at approx. 16-18 bar
In tank
Direct current motor with flat ceramic grinder blades
Dose adjustment controlled by the electronic system
During heating phase- approx. 5.6 A
221 x 340 x 430 mm
(data may vary depending on the model)
221 x 386 x 430 mm
(data may vary depending on the model)
7.5kg - 8.0Kg (EXT)
(data may vary depending on the model)
1.8 l - 2.5 l (EXT)
250 g. - 500 g (EXT)
15
Approx. 15 sec Max. on first filling cycle
Approx. 45 sec.
Approx. 8-10 sec.
02 TECHNICAL SPECIFICATIONS
1/6