Table of Contents
Advertisement
4. Troubleshooting
► Error Code
U3–3311 / U3–3313 / U3–3314
► Error message
Original paper jam inside of scanner
► Symptom
Jam has occurred inside the DSDF unit.
► Troubleshooting method
1) Find and remove the jammed paper.
2) If this error occurs continually, open the DSDF-open cover and check the Pre-Regi sensor and Regi sensor. If the
sensor is defective, replace it(0604–001381).
3) Open the DSDF Unit and check the Scan In sensor operation. Check if the sensor harness is connected correctly. If
the sensor is defective, replace it. If the black sheet in the middle of the platen ADF glass is contaminated, clean it.
4-211
Copyright© 1995-2013 SAMSUNG. All rights reserved.
Advertisement
Chapters
Table of Contents
Troubleshooting
