3.3.29.1. Fuser-Out Sensor
1. Remove the Side Unit. (Refer to 3.3.29.)
2. Remove both screws. Then turn up the Cover-Side Exit.
3.3.29.2. Feed 2 sensor
1. Remove the Side Unit. (Refer to 3.3.29.)
2. Remove 4 screws.
Copyright© 1995-2013 SAMSUNG. All rights reserved.
3. Remove 1 screw. Then turn up the sensor holder.
4. Unplug the sensor connector. Then release the
Fuser-Out sensor from its holder.
3. Remove 3 screws. Then remove the Cover-Harness
Lower[A].
3. Disassembly and Reassembly
3-48