Video System Failure: #S1-1113. Turn Off Then; The Clock Became Initial Time. Set A Time Again; Video System Failure: #S1-1411. Turn Off Then - Samsung SL-X7600GX Service Manual

► Error Code
S1–1313
► Error message

The clock became initial time. Set a time again.

► Symptom
Saved time is invalid
► Troubleshooting method
1) Set up the time and reboot the machine.
a) Select "Machine Setup" on touch screen.
b) Select "General Setting".
c) Select "Date and Time" and set the time.
2) If the problem persists, check the following.
a) Remove the rear cover.
b) Remove the fax holder from the main board.
c) Measure the voltage of the battery. If the battery is normal, the measured value is over 3V.
3) If the battery is normal, replace the main board.
► Error Code
S1–1411 / S1–1413
► Error message
Video System Failure: #S1-1411. Turn off then on
Video System Failure: #S1-1413. Turn off then on
► Symptom
Video chip in main board is defective.
► Troubleshooting method
1) Turn the machine off then on.
2) If the problem persists, replace the main board.
NOTE
Insert the MSOK to the new main board.
Copyright© 1995-2013 SAMSUNG. All rights reserved.
4. Troubleshooting
4-178