Dsdf Stacker Sensor - Samsung SL-X7600GX Service Manual

3. Disassembly and Reassembly

3.3.34.2. DSDF Stacker Sensor

1. Open the DSDF-open cover.
2. Remove 4 screws.
3. Pull the pick up module to the front and unplug the
connector while lifting up its front.
3-69
4. Push the lower part of the cover to release the lock by
stopper.
5. Release the Stacker Upper Assy while keep the status
of step 4.
6. Release the harness from the marked position. Place the
Stacker Upper Assy on the rear cover.
Copyright© 1995-2013 SAMSUNG. All rights reserved.