Samsung SL-X7600GX Service Manual page 423

A3 color copier
Table of Contents

Advertisement

► Error Code
M1–5211
M1–5212
► Error message
Paper is low in Tray 2. Load paper.
Paper is empty in Tray 2. Load paper.
► Symptom
Paper in the tray is less than 10% of specification. / The photo sensor is defective.
► Troubleshooting method
1) Remove tray 2. Load paper in the tray, and insert the tray 2.
2) If paper is loaded but error message has not disappeared, check the following :
a) Turn the machine off. Open the Side Cover.
b) Remove Pick-Up Unit2.
c) If the photo sensor is contaminated, clean it.
d) If the photo sensor is defective, replace it.
e) If the actuator is defective, replace it.
Copyright© 1995-2013 SAMSUNG. All rights reserved.
4. Troubleshooting
4-172

Advertisement

Table of Contents
loading

Table of Contents