Selecting Input Modes - Yamaha DSP-AX757SE Owner's Manual

Selecting input modes

This unit comes with a variety of input jacks. Do the
following to select the type of input signals you want to
use.
1
Rotate INPUT (or press one of the input
selector buttons on the remote control) to
select the input source.
INPUT
or
Front panel
2
Press INPUT MODE to select an input mode.
In most cases, use AUTO.
INPUT MODE
Front panel
DVR/VCR2
VCR1 V-AUX
SP
A
Input source
AUTO
Automatically selects input signals in
the following order:
1) Digital signals
2) Analog signals
DTS
Selects only digital signals encoded in
DTS. If no DTS signals are input, no
sound is output.
ANALOG
Selects only analog signals. If no
analog signals are input, no sound is
output.
* If this unit detects a Dolby Digital or DTS signal, the
decoder automatically switches to the appropriate
decoder.
y
You can adjust the default input mode of this unit (see page 63).
PHONO MULTI CH IN
A B
V-AUX TUNER MD/CD-R CD
DTV/CBL VCR 1 DVR/VCR2 DVD
Remote control
INPUT MODE
or
Remote control
DTV/CBL MD/CD-R
DVD TUNER CD PHONO
VOLUME
L
Input mode
*
Notes
• When playing a DTS-CD/LD, be sure to set the INPUT MODE
to DTS.
• If the digital output data of the player has been processed in any
way, you may not be able to perform DTS decoding even if you
make a digital connection between this unit and the player
depending on the player.
■ Displaying information about the input
source
You can display the type, format and sampling frequency
of the current input signal.
1
Select the input source.
DTV/CBL
2
Press STRAIGHT.
dB
R
PLAYBACK
MULTI CH IN
A B PHONO
V-AUX TUNER MD/CD-R CD
VCR 1 DVR/VCR2 DVD
STRAIGHT
EFFECT
STRAIGHT
37