Selecting Input Modes - Yamaha RX-V750 Owner's Manual

Downmixing to 2 channels
You can enjoy 2-channel stereo playback even from multi-
channel sources.
Rotate PROGRAM (or press STEREO on the
remote control) to select 2ch Stereo.
PROGRAM
or
Front panel
2ch Stereo
y
You can use a subwoofer with this program when SWFR or
BOTH is selected in "BASS OUT".
Listening to unprocessed input signals
In STRAIGHT mode, two channel stereo sources are
output from only the front left and right speakers. Multi-
channel sources are decoded straight into the appropriate
channels without any additional effect processing.
Press STRAIGHT (EFFECT) to select STRAIGHT.
STRAIGHT
EFFECT
Front panel
STRAIGHT
Press STRAIGHT (EFFECT) again so that "STRAIGHT"
disappears from the display when you want to turn the
sound effect back on.
Virtual CINEMA DSP
Virtual CINEMA DSP allows you to enjoy the CINEMA
DSP programs without surround speakers. It creates
virtual speakers to reproduce the natural sound field.
If you do not connect surround speakers, Virtual CINEMA
DSP activates automatically whenever you select a
CINEMA DSP sound field program.
Note
Virtual CINEMA DSP will not activate, even when "SURR L/R
SP" is set to NONE (see page 54) in the following cases:
– When MULTI CH INPUT is selected as the input source.
– When headphones are connected to the PHONES jack.
STEREO HALL JAZZ ROCK
1 2 3 4
MUSIC ENTERTAIN TV THTR MOVIE
5 6 7 8
q/DTS
PURE DIRECT NIGHT EX/ES
9 0 10 ENTER
CHP/INDEX
Remote control
STRAIGHT
or
EFFECT
Remote control

Selecting input modes

This unit comes with a variety of input jacks. Do the
following to select the type of input signals you want to
use.
1
Rotate INPUT to select the input source.
INPUT
2
Press INPUT MODE to select an input mode.
In most cases, use AUTO.
INPUT MODE
t
DVR/VCR2
96 VCR-1 V-AUX
24
SILENT CINEMA NIGHT ZONE2
MATRIX DISCRETE
SP
VIRTUAL
q A B
DIGITAL
SLEEP
q q
EX PL
1 D 0 D VD D AUTOO00
q q
PL PL x
PCM
Input source
AUTO
Automatically selects input signals in
the following order:
1) Digital signals
2) Analog signals
DTS
Selects only digital signals encoded in
DTS. If no DTS signals are input, no
sound is output.
ANALOG
Selects only analog signals. If no
analog signals are input, no sound is
output.
* If this unit detects a Dolby Digital or DTS signal, the
decoder automatically switches to the appropriate sound
field program.
y
You can adjust the default input mode this unit selects when the
power is turned on (see page 59).
PLAYBACK
DTV/CBL MD/CD-R
DVD TUNER CD PHONO
PTY HOLD AUTO TUNED STEREO MEMORY MUTE VOLUME
HiFi DSP
PS PTY RT CT EON
96/24
ft L C
mS
LFE SL SB SR
dB
Input mode
*
dB
R
37