I-Option - Konica Minolta bizhub c3110 Advanced User's Manual

1 Advanced Functions
To use advanced functions on this machine, you need to install optional license kits.
The table below shows the correspondence between available advanced functions and options or license
kits to be purchased.
License kit
i-Option LK-106
i-Option LK-107
i-Option LK-108
i-Option LK-111
Tips
i-Option LK-106, i-Option LK-107, and i-Option LK-108 can only be used when an optional Hard Disk is
installed.
[Advanced Functions]
Function Overview
Bar code font Generates a bar code based on data sent to this ma-
chine from the ERP (Enterprise Resource Planning)
system, and prints it from this machine.
You can directly print data without using the printer
driver.
Unicode font Prints text information (unicode) of multiple languages
sent to this machine from the ERP (Enterprise Re-
source Planning) system.
You can directly print data without using the printer
driver.
OCR font OCR font can be used on this machine. OCR font is
standardized font that enables text to be appropriately
recognized when the OCR (Optical Character Recog-
nition) is used.
ThinPrint function Configure settings to enable the ThinPrint function in
this machine.
ThinPrint is a function that realizes speedy printing by
performing data compression or broadband control
when a print job is sent from ThinPrint Engine (.print
Engine) to ThinPrint Client (.print Client). This machine
operates as ThinPrint Client (.print Client).
For details, refer to page 3-2.
1
1-2