Table of Contents
Advertisement
KX-MB2230EU/ KX-MB2270EU/ KX-MB2515EU/ KX-MB2545EU/ KX-MB2575EU/ DP-MB310EU
12.3.9.1.3. Receive Problem
Confirm the following before starting troubleshooting.
• Is the recording paper installed properly? Refer to the next page.
Note:
"596: Transmit level set" represents a service code. Refer to the Service Function Table (P.142).
"718: Receive speed select" represents a service code. Refer to the Service Function Table (P.142).
For the receiving problem, we have thought of causes other than in the software. Some causes may be when the fax changes to
the memory receiving mode (for example, when out of paper). and the memory becomes full of the imprinted fax data. In this
case, [MEMORY FULL] and its main cause (for example, "OUT OF PAPER") are displayed on the LCD. Accordingly, by solving
the main problem, [MEMORY FULL] can be canceled and the receiving problem can solved.
Please refer to User Recoverable Errors (P.171) for the above items.
Also, when it actually becomes a hardware deformity, please check each sensor.
218
Advertisement
Table of Contents
Troubleshooting
