Useful printing operations
3.5
Finishing documents
Stapling and hole punching
Printed documents can be bound with staples or have holes punched in them.
Windows PCL/PS drivers: Finish tab
Macintosh OS X driver: Layout/Finish
!
Detail
The Staple settings are available only if the optional finisher has been installed.
The Punch settings are available only if the optional punch kit and finisher have been installed.
By selecting an output tray, the output destination can be specified.
Select the desired Paper Arrangement setting to specify whether priority is given to the finished product
or to productivity as the method for adjusting the binding position.
Note
For details, refer to chapter 8, "Print functions of the PCL/PS drivers for Windows", and chapter 9, "Print
function of Mac OSX", of the User's Guide [Print Operations].
Center stapling and folding
Select whether the finished document is folded in half, and whether it is folded in half and stapled.
Windows PCL/PS drivers: Finish tab
Macintosh OS X driver: Layout/Finish
!
Detail
The center stapling and folding setting is available only if the optional finisher has been installed. The
settings that are available differ depending on the installed options.
Note
For details, refer to chapter 8, "Print functions of the PCL/PS drivers for Windows", and chapter 9, "Print
function of Mac OSX", of the User's Guide [Print Operations].
C353/C253/C203
Punch
Half-Fold
Center Staple
and Fold
Staple
3
3-9