Konica Minolta bizhub C203 Quick Manual page 231

6
Available Finishing settings
The Finishing settings that are available differ depending on the installed options. For details, refer to chapter
2, "Basic copy operations", of the User's Guide [Copy Operations].
Setting
Sort
Group
Offset
Staple
Punch
Center Sta- Half-Fold
ple/Fold
Center Staple
Center Sta- Center Erase
ple & Fold Erase
Center Erase
None
Note
For details, refer to chapter 6, "Use Document", of the User's Guide [Box Operations].
6-14
Description
Select this setting to separate each set of a multi-page document.
Select this setting to separate the copies of each page in a multi-page doc-
ument.
When a finisher is not in- If the sorting conditions are met, copies are
stalled fed out and sorted in an alternating criss-
cross pattern.
When a finisher is installed The copies are fed out shifted to separate
them.
Copies can be stapled in the corner or at two locations.
Holes for filing can be punched in the copies
Select this setting to fold copies in half before feeding them out.
Select this setting to staple copies at two locations along the center.
Select this setting to staple copies at two places along the center, fold the
copies in half, and then erase the image in the 10mm-wide area, with the
fold line as the center, before outputting.
Select this setting to staple copies at two places along the center, fold the
copies in half, and output them without erasing the image on the center fold
line.
Useful box operations
C353/C253/C203