Configuration Example; Network Requirements; Configuration Procedure - HP MSR4080 Configuration Manual

Step
9. Associate the traffic class
with the traffic behavior in
the QoS policy.
10. Return to system view.
11. Apply the QoS policy.
12. (Optional.) Display traffic
redirecting configuration.
Conf iguration example
Netw ork requirements
As shown in
through GigabitEthernet 2/1/0.
Configure traffic redirecting on GigabitEthernet 2/1/0 to meet the following requir
Packets from network segment 2.2.2.0/24 are
•
Packets from network segment 3.3.3.0/24 are forwarded to GigabitEth
•
Figure 21 Network diagram

Configuration procedure

# Create basic ACL 2000, and configure a rule to match packets from network segment 2.2.2.0/24.
<RouterA> system-view
[RouterA] acl number 2000
[RouterA-acl-basic-2000] rule permit source 2.2.2.0 0.0.0.255
[RouterA-acl-basic-2000] quit
# Create basic ACL 2001, and configure a rule to match packets from network segment 3.3.3.0/24.
[RouterA] acl number 2001
[RouterA-acl-basic-2001] rule permit source 3.3.3.0 0.0.0.255
[RouterA-acl-basic-2001] quit
# Create a traffic class named classifier_1, and use ACL 2000 as the match criterion in the traffic class.
[RouterA] traffic classifier classifier_1
[RouterA-classifier-classifier_1] if-match acl 2000
Command
classifier classifier-n
behavior-name
quit
•
•
display qos policy user-defined [ policy-name ]
Figure 21, packets from network segments 2.2.2.0/24 and 3.3.3.0/2
ame behavior
Applying th e QoS policy to an interface or
PVC
Applying the QoS policy to the control
plane
forwarded to GigabitEthernet 2/1/1.
73
Remarks
By default, no
class-behavior
association is configured
for a QoS policy.
N/A
Choose one of the
application destinations
as neede d.
By default, a QoS policy
is not applied.
Available in any view.
4 enter Router A
ements:
ernet 2/1/2.