Configure Ospf - HP MSR4080 Configuration Manual

Configuration procedure
1. Configure IP addresses for each interface. (Details not shown.)
2. Configure a BGP connection on Router A.
<RouterA> system-view
[RouterA] bgp 100
[RouterA-bgp] peer 167.1.1.2 as-number 200
[RouterA-bgp] peer 167.1.1.2 connect-interface
[RouterA-bgp] address-family ipv4
[RouterA-bgp-ipv4] import-route direc
[RouterA-bgp-ipv4]
[RouterA-bgp-ipv4] quit
[RouterA-bgp] quit
3. Configure Router B:
# Configure a VPN instance.
<RouterB> system-view
[RouterB] ip vpn-instance vpn1
[RouterB-vpn-instance-vpn1] route-
[RouterB-vpn-instance-vpn1]
[RouterB-vpn-instance-vpn1] v
[RouterB-vpn-instan
# Configure a BGP connection.
[RouterB] router id 1.1.1.1
[RouterB] bgp 200
[RouterB-bgp] peer 2.2.2.2 as-number 200
[RouterB-bgp] peer 2.2.2.2 connect-inter
[RouterB-bgp] ip vpn-instance vpn1
[RouterB-bgp-vpn1] peer 167.1.1.1 as-number 100
[RouterB-bgp-vpn1] address-fam
[RouterB-bgp-ipv4-vpn1] p
[RouterB-bgp-ipv4-vpn1] quit
[RouterB-bgp] address-family vpnv4
[RouterB-bgp-vpnv4] peer 2.2.2.2 enable
[RouterB-bgp-vpnv4] quit
[RouterB-bgp] quit
# Configure MPLS.
[RouterB] mpls lsr-id 1.1.1.1
[RouterB] mpls ldp
[RouterB-mpls-ldp] quit

# Configure OSPF.

[RouterB] ospf
[RouterB-ospf-1] area 0
[RouterB-ospf-1-area-0.0.
[RouterB-ospf-1-ar
[RouterB-ospf-1-
[RouterB-ospf-1] quit
peer 167.1.1.2 enable
distinguisher 200:1
vpn-target 200:1 export-extcommunity
pn-target 200:1 import-extcommunity
ce-vpn1] quit
ily ipv4
eer 167.1.1.1 enable
0.0] network 1.1.1.1 0.0.0.0
ea-0.0.0.0] network 168.1.1.0 0.0.0.255
area-0.0.0.0] quit
81
gigabitethernet 2/1/1
t
face loopback 0