Configuration Example; Network Requirements - HP MSR4080 Configuration Manual

Step
8. Create a QoS policy and
enter QoS policy view.
9. Associate the traffic class
with the traffic behavi
the QoS policy.
10. Return to system view.
11. Apply the
12. (Optional.) Display the
priority marking
configuration.
Conf iguration example

Network requirements

As shown in
Traffic source
Host A, B
Host A, B
Host A, B
Figure 20 Network diagram
Command
qos policy policy-name
classifier classifier-name behavior
or in
behavior-name
quit
•
QoS policy.
•
display qos policy user-defined [ policy-name ]
Figure 20, configure priority marking on the router to me
Destination
Data server
Mail server
File server
Applying the QoS policy to an interface or
PVC
Applying the QoS policy to the control
plane
69
Remarks
By default, no QoS policy
is configured.
By default, a traffic class
is not associated with a
traffic behavior.
N/A
Choose one of the
application destinations
as needed.
By default, no QoS policy
is applied.
Available in any view.
et the following requirements:
Processing priority
High
Medium
Low