Displaying And Maintaining Qos Policies - HP MSR4080 Configuration Manual

Step
1. Enter system view.
2. Enter interface view.
3. Configure the traffic rate
statistics collection period
for the interface.

Displaying and maintaining QoS policies

Execute display commands in any view and reset commands in user view.
Task
Display traffic class configuration
(MSR1000/MSR2000/MSR3000).
Display traffic class configuration
(MSR4000).
Display traffic behavior configuration
(MSR1000/MSR2000/MSR3000).
Display traffic behavior configuration
(MSR4000).
Display QoS policy configuration
(MSR1000/MSR2000/MSR3000).
Display QoS policy configuration
(MSR4000).
Display information about QoS policies
applied to interfaces
(MSR1000/MSR2000/MSR3000).
Display information about QoS policies
applied to interfaces (MSR4000).
Display information about QoS policies
applied to the control plane
(MSR1000/MSR2000/MSR3000).
Display information about QoS policies
applied to a control plane (MSR4000).
Display information about QoS policies
applied to the management interface
control plane (MSR4000).
Display information about the predefined
QoS policy applied to the control plane
(MSR1000/MSR2000/MSR3000).
Command
system-view
interface interface-type interface-number
qos flow-interval interval
Command
display traffic classifier { system-defined | user-defined }
[ classifier-name ]
display traffic classifier { system-defined | user-defined }
[ classifier-name ] [ slot slot-number ]
display traffic behavior { system-defined | user-defined }
[ behavior-name ]
display traffic behavior { system-defined | user-defined }
[ behavior-name ] [ slot slot-number ]
display qos policy { system-defined | user-defined } [ policy-name
[ classifier classifier-name ] ]
display qos policy { system-defined | user-defined } [ policy-name
[ classifier classifier-name ] ] [ slot slot-number ]
display qos policy interface [ interface-type interface-number [ pvc
{ pvc-name | vpi/vci } ] ] [ inbound | outbound ]
display qos policy interface [ interface-type interface-number [ pvc
{ pvc-name | vpi/vci } ] ] [ slot slot-number ] [ inbound | outbound ]
display qos policy control-plane
display qos policy control-plane slot slot-number
display qos policy control-plane management
display qos policy control-plane pre-defined
26
Remarks
N/A
N/A
The default setting is 5 minutes.
A subinterface uses the statistics
collection period configured on
the main interface.
A PVC uses the statistics
collection period configured on
the ATM main interface.