Displaying And Maintaining Wred - HP MSR4080 Configuration Manual

Set the exponent for average queue size calculatio
•
Configuration procedure
# Enter system view.
<Sysname> system-view
# Enter interface view.
[Sysname] interface gigabitethernet 2/1/0
# Enable IP precedence-based WRED.
[Sysname-GigabitEthernet2/1/0] qos wred
# Set the following parameters for packets with IP precedence value 3: lower threshold 20, upper
threshold 40, and drop prob
[Sysname-GigabitEthernet2/1/0] qos wred ip-precedence 3 low-limit 20 high-limit 40
discard-probability 15
# Set the exponent for a
[Sysname-GigabitEthernet2

Displaying and maintaining WRED

Execute display commands in any view.
Task
Display WRED configuration a
an interface or PVC.
ability denominator 15.
verage queue size ca lculation to 6.
/1 /0] qos wred weighting-constant 6
nd statistics for
65
n to 6.
ip-precedence enable
Command
display qos wred interface [
[ pvc { pvc-name | vpi/vci }
interface-type interface-number
] ]