Konica Minolta bizhub c252 User Manual page 68

Using copy functions
Touch [Auto] to automatically determine the
stapling or hole-punching position according to
the orientation of the loaded document. The
paper is stapled or holes are punched along the
long side of the paper if the document length is
297 mm or less or along the short side of the
paper if the document length is more than 297
mm.
3
Touch [OK].
The Basic screen appears again.
Note
The number of punched holes differ depending on the
country (region) where the unit is installed. For details,
consult your technical representative.
C252
2
2-31