Removal Of The Instrument Cluster - PEUGEOT Satelis 500 Workshop Manual

Removal of the instrument cluster

- Remove:
- The front top cover panel. See: Procedure 7.
Page: 35
• The wind deflector.
• The handlebar upper fairing.
- On each side remove:
• 1 plastic screw. (1)
• 1 washer head screw. Ø5 mm. (2)
• 1 washer head screw. Ø6 mm. (3)
- Press the locking system (1) to actuate the
positioning lever (2) of the instrument cluster's
connector.
- Push the lever all the up (A) in order to remove
the connector from the instrument cluster.
- Remove the instrument cluster fairing.
Note: When connecting, the lever must be
pushed all the way to (A) in order not
to damage the connector.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
2
1
2
BODY PANELS
1
3
A
39