- Remove the spacer. (9)
- Remove the wheel. (5 screw)
Tightening torque: 2.5 m.daN.
- Remove the calliper. (2 screw).
Tightening torque: 2.5 m.daN.
- Remove the 2 spindles (10).
- Remove the brake pads.
Mini. thickness: 1.5 mm.
- When refitting the brake pads, push the
pistons all the way into their housing.
Note: After refitting, actuate the brake
levers several times to bring the
brake pads against the brake disc.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
SERVICE OPERATIONS
9
10
53