PEUGEOT Satelis 500 Workshop Manual page 64

SERVICING THE ABS/MBS SYSTEM
- Connect the reservoir containing brake fluid
to the modulator bleed screw (1) using a
transparent pipe. The reservoir must be kept
higher than the modulator to easily check
that the air bubbles are being expelled.
- Open the bleed screw by 1 to 2 turns.
- Actuate the RH brake lever in an even way
and without undue haste while topping up
with brake fluid in the master cylinder.
Note: Don't lean over the master cylinder
when bleeding the circuit in order
not to get splashed by brake fluid.
- Stop the operation when no more bubbles
are expelled from the modulator.
- Close the bleeder screw.
62
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
1