Electronic Instrument Functioning Principle; Functions Of The Instrument Panel; Initializing The System - PEUGEOT Satelis 500 Workshop Manual

ELECTRONIC INSTRUMENT FUNCTIONING PRINCIPLE

ELECTRONIC INSTRUMENT FUNCTIONING PRINCIPLE

Functions of the instrument panel

- Speedometer.
- Revolution counter.
- Tripmeter.
- Daily odometer.
- Digital clock.
- Fuel gauge.
- Outside temperature gauge.
- Engine temperature gauge.
- Battery voltage fault.
- Maintenance indicator.
- Flasher unit.
mph
km/h

Initializing the system

When preparing the vehicle, switch off the ignition and connect the battery. The system
initializes itself when connecting the battery.
The battery must never be connected or disconnected when the ignition is switched on.
The instrument panel initializes itself every time the ignition is switched on:
- All warning lights are switched on.
- All elements of the multifunctional display are activated.
- The two hands (speedometer and revolution counter) move simultaneously from the minimum to
the maximum and back.
If this is not the case, switch the ignition off, disconnect and re-connect the battery.
After initializing, the low oil, stoplight or ABS, injection diagnosis indicator lights remain on.
16
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
B
ABS
EFI
A
Instrument panel indicator lamps:
• Oil pressure.
• ABS/MBS or STOP
• Left direction indicator.
• High beam.
• Immobiliser state.
• Diagnosis of the ignition system.
• Opening the storage compartment.
• Right direction indicator.
(A) Control button.
Two versions are available:
X1000 r/min
1. Basic version featuring
a STOP indicator light (B).
2. ABS/MBS version
featuring an ABS indicator
light (B)