Detaching And Refitting The Upper And Lower Fuser Thermistors, Upper And Lower Fuser Thermostats, Upper And Lower Fuser Heater Lamps And Upper And Lower Fuser Rollers - Kyocera FS-C8026N Service Man

2BF
(2) Detaching and refitting the upper and lower fuser thermistors, upper and lower fuser thermostats, upper and
lower fuser heater lamps and upper and lower fuser rollers
<Procedure>
1. Remove the fuser unit (See page previous
page).
2. Remove one screw and then remove the
fuser handle.
3. Remove two screws and then remove the
rear fuser cover.
4. Remove two screws and then remove the
front fuser cover.
1-6-18
Rear fuser cover
Screw
Screw
Fuser handle
Screw
Figure 1-6-25
Front fuser cover
Figure 1-6-26
Screws