Paper Feed Section; Paper Cassette, Primary Paper Feed Unit And Paper Feeder Feed Section - Kyocera FS-C8026N Service Man

2-1 Mechanical construction

2-1-1 Paper feed section

As the paper feed methods, this printer provides paper feed from the paper cassette which can hold 500 sheets of paper,
paper feed from the MP tray which can hold 150 sheets of paper (75g/m
paper feeder.
The Paper feed section is composed of paper cassette, primary paper feed unit, MP tray, MP tray feed unit and paper feed
unit.

(1) Paper cassette, primary paper feed unit and paper feeder feed section

The paper cassette is fit underneath the primary paper feed unit. The paper stored in the paper cassette is lifted up so that
it is contacted against the forwarding roller as the bottom plate in the paper cassette is raised by the lifter mechanism. The
sheet at top is rewound to the forwarding roller and sent to the paper feed roller which forward the paper in the printer. In
order to prevent paper misfeed during feeding, the lower paper feed pulley which is positioned face-to-face with the paper
feed roller acts to prevent feeding more than one sheet at a turn of the forwarding roller.
The paper feeder feed section feeds paper from the optional paper feeder installed at the lower part of the printer to the
paper feed unit through the feed B roller and the feed B pulley.
Figure 2-1-1 Paper cassette, primary paper feed unit and paper feeder feed section
(1) Bottom plate
(2) Lift plate
(3) Cursor rail A
(4) Paper cassette
(5) Cursor rail C
(6) Cassette cursor C
(7) Cassette lift shaft
(8) Upper primary paper feed unit housing
(9) Forwarding pulley collar
(10) Forwarding pulley support plate
6
5
2
), and, in addition, paper feed from the optional
10
9
8
12
13
1
3
4
(11) Paper feed roller
(12) Forwarding roller
(13) Lower paper feed pulley
(14) Junction guide
(15) Housing reinforcing plate
(16) Right cover 1
(17) Lower feed plate
(18) Feed B roller
(19) Feed B pulley
11
14
15
2
7
18
2BF
17
16
19
2-1-1