Specifications - T&D RTR-500MBS-A Getting Started Manual

Mobile base station
Hide thumbs Also See for RTR-500MBS-A:
Table of Contents

Advertisement

Specifications

Remote Units: RTR-501 / 502 / 503 / 507 / 574 / 576 / 505-TC /
505-Pt / 505-V / 505-mA / 505-P
Compatible Devices
( Including L Type and H Type )
Repeater: RTR-500
Maximum Number
Remote Units: 20 units (*1)
of Registrations
Repeaters: 5 units x 4 groups
<Mobile Data Communication>
WCDMA/HSDPA: 850 / 1900 MHz
GSM/GPRS: 850 / 900 / 1800 / 1900 MHz
<Between Base Unit(s) - ( Repeaters ) - Remote Unit(s)>
- Wireless Communication ( short range radio communication )
Communication
FCC Part15 Section247 / IC RSS-210 ( Frequency Range: 902
Interfaces
to 928MHz, RF Power: 7 mW )
- Optical Communication ( proprietary protocol )
( With compatible Remote Units except RTR-574 and RTR-576 )
<Between Base Unit - PC>
- USB Communication ( For Setup )
Wireless
Approx. 150 meters ( 500 ft ) if direct and unobstructed
Transmission Range
Data Download Time from Remote Unit ( for 16,000 readings )
- Via wireless communication: About 2 min.
Communication
The same amount of time will be necessary for each Repeater.
Time
Does not include communication time from Base Unit to server or
e-mail.
<Input Terminal: Contact Input>
Internal Pull-up: 3 V 100 k
External Alarm
Maximum Input Voltage: 30V
Input/Output
<Output Terminal: Photo Mos Relay Output>
Terminal (*2)
Voltage when OFF: AC/DC 50V or less
Current when ON: 0.1A or less
Resistance when ON: 35
Communications
SMTP ( POP before SMTP, SMTP-AUTH
Protocol
SMTPS ( SMTP over SSL ), FTP, SMS (*3)
AA Alkaline Battery ( LR6 ) x 4
Power
AC Adaptor ( AD-05A3 ) ( 5V, 3A )
External Power Supply ( DC 10 - 24V )
Expected battery life with only AA alkaline batteries:
Approx. 2 days under the following conditions ( only one Remote
Battery Life (*4)
Unit and no Repeaters, warning monitoring ON, downloading data
once a day, sending current readings at a 10 minute interval )
Dimensions
Weight
Operating
Environment
GPS Interface (*5)
SIM Card (*3)(*6)
Software
Compatible OS (*7)
Display Languages
(*8)
*1: For RTR-574 and RTR-576, registration of one unit will be counted as two units.
*2: In order to use the external alarm terminal, please prepare a compatible connector: JST
PAP-04V-S.
*3: SMS is required for some functions of the RTR-500MBS-A. If SMS is necessary, make
sure that the contract you have with your carrier includes this service.
*4: Battery life varies depending upon multiple factors including number of warning reports
sent, ambient temperature, frequency of communication, and battery performance. All
estimates are based on operations carried out with a new battery and are in no way a
guarantee of actual battery life.
*5: In order to use the GPS function (to attach geographical positioning info to current
readings data), please purchase a compatible GPS antenna.
*6: Please prepare a contracted SIM card separately.
*7: For installation, it is necessary to have Administrator (Computer Administrator) rights.
*8: We recommend using an operating system in the same language as the display language.
LOGIN ),
Operation in different languages is not guaranteed.
The specifications listed above are subject to change without notice.
29
H 96 mm x W 66 mm x D 39 mm ( excluding antenna )
Antenna Length ( Cellular / Local ): 109 mm
Approx. 210 g ( including batteries )
Temperature: 10 to 55 °C ( -10 to 55 °C with external power
connected)
Humidity: 90 %RH or less ( no condensation )
Connector: SMA Male Plug
Power Supply: 2.5 to 2.7 V
Standard Size SIM Card ( WCDMA or GSM )
RTR-500MBS for Windows
Microsoft Windows 10 32 / 64 bit
Microsoft Windows 8 32 / 64 bit
Microsoft Windows 7 32 / 64 bit
Microsoft Windows Vista 32 bit ( SP1 or later )
English

Advertisement

Table of Contents
loading

Table of Contents