Registering With T&D Webstorage Service; Setting Up Smtp Mail Server - T&D RTR-500MBS-A Getting Started Manual

3
Registering with T&D WebStorage Service
By using T&D WebStorage Service, a cloud service provided by T&D
free of charge, it is possible to monitor the RTR-500MBS-A data over
the Internet.
If you don't use T&D WebStorage Service, please arrange a
provider's server or your own FTP server.
1.
Open your web browser and access the site:
http://www.webstorage-service.com/
2.
Click [Get a User ID] to go to the registration page.
3.
Enter an e-mail address and password for registration, and click
[Agree and Get a User ID].
4.
An e-mail containing the necessary URL link will be sent to the
address you entered. Access the displayed URL to get a User ID.
5.
A completion notice will be sent to your registered address upon
completion of the User ID registration.
This e-mail contains important information such as user ID,
password, FTP server name, and settings information necessary
for making settings.
4

Setting up SMTP mail server

An SMTP server is required to send Warning Report, Current
Readings, and Recorded Data via e-mail.
• Check with your provider to make sure that the mail server you are using
supports one of the following mail authentication methods: SMTP-AUTH
(LOGIN), SMTPS (SMTP over SSL), or POP before SMTP.
• Some Internet service providers block port 25 (the default port for SMTP)
in an attempt to control Spam and viruses.
In this case, please use the outgoing mail submission port (SMTP port
587).
• To use SMTPS (SMTP over SSL), set the SMTP Port Number to 465.
13