Connecting The Base Unit To A Pc - T&D RTR-500MBS-A Getting Started Manual

5.
After installation, "RTR-500MBS for Windows" will appear in the
Windows Start Screen or Start Menu.
6.
Repeat the same procedures from
2

Connecting the Base Unit to a PC

1.
Open the "RTR-500MBS for Windows" from the Windows Start
Screen or Start Menu.
2.
In the displayed launcher window, click and open the
"RTR-500MBS Settings Utility".
3.
Turn the operation switch on the Base Unit to <STBY>, and connect
it to the computer with the supplied USB cable.
4.
The USB driver installation will start automatically.
5.
After the USB driver installation is completed, a window will open
where you can make or change various settings related to the
RTR-500MBS-A.
to install all the applications.
15
If the settings window does not automatically open:
If the settings window does not appear after one minute of USB
connection, try reconnecting the USB cable. If this does not work,
please see [ Help for Unit Recognition Failure] in the launcher menu
and check the USB driver.