Installing The Device; Connecting To An External Power Source (When Applicable); Installing Devices - T&D RTR-500MBS-A Getting Started Manual

Installing the Device

1
Connecting to an External Power Source (when appli-
cable)
2
Installing the Device
3
Turning Operation Switch to the <Run> Position
4
Accessing T&D WebStorage Service
1
Connecting to an External Power Source (when
applicable)
Use an External Power Cable
The supplied external power cable can be used to connect to an external
power source such as a car battery.
* For cable specifications, see the [Option] page (p.30).
Connection Example
Black

Red
Fuse
Use an AC Adaptor
Connect an AC Adaptor AD-05A3 (sold separately).
• Do not use an AC adaptor other than the one specified.
2

Installing Devices

If the target Base Unit is connected to a PC, disconnect the USB
cable. Place the Base Unit, Repeater(s), and Remote Unit(s) in their
actual positions.
• Before placement, please read "Notes and Precautions for Installing Wireless
Communication Devices" on page 6.
22
Power Source Conditions
Voltage: 10 - 24V
Current: MAX 2A
Battery
12V / 24V
AC Adaptor
AD-05A3 (option)