Getting Ready; Preparing A Sim Card - T&D RTR-500MBS-A Getting Started Manual

Getting Ready

1

Preparing a SIM card

2
Setting up the Device
Connecting the Antennas
Preparing a GPS Antenna if necessary
Installing a SIM Card and Batteries
3
Registering with T&D WebStorage Service
4
Setting up a mail server (SMTP server)
• Do not connect a RTR-500MBS-A to your computer until the software has
been installed.
1
Preparing a SIM card
Please purchase a SIM card that meets the following requirements:
• The card is 3G mobile network compatible. (Voice call only SIM cards may not be
used.)
• The card has been or can be activated
• It is a Standard size SIM card
Standard SIM
• The SIM card must also have SMS (Short Message Service) capability if the
following functions are desired.
- Warning Notification via SMS
- Remote control of the RTR-500MBS-A from a mobile device via SMS
commands(*)
* Available commands are the "start" command, "stop" command, and "read"
command. For more details, see the Operation Guide that comes with the
software.
[Operation Guide] > [Other Useful Functions] > [Controlling Base Unit via
SMS Command]
For the estimated data usage, please see p.28 [FAQ's] > [Q&A about SIM
Cards].
10
Micro SIM
Nano SIM