Registering A Remote Unit - T&D RTR-500MBS-A Getting Started Manual

Auto-Sending of
ON
Recorded Data
Transmission
Select either method.
Scheduling Method
Transmit by day Make settings here for dates and times for the
and time automatic downloading and sending of recorded
data. Up to eight patterns can be set.
If you select more than one date and time, make
sure that they are six or more hours apart.
Transmit by Specify the interval at which you wish to have data
Interval automatically sent and choose at what minute of the
hour you wish to have the next transmission occur.
Transmission Method FTP
File Name <base>_<remote>_<time>
6.
After entering the necessary information, click [Apply].
3

Registering a Remote Unit

1.
Open the [Remote Unit Settings] menu.
2.
Click [Register] to open the registration window.
3.
Click [Yes] to the confirmation message. Follow the on-screen
instructions and connect the target Remote Unit.
• Optical Communication: RTR-501 / 502 / 503 / 505 / 507
Place the Remote Unit face down on the Base Unit connected to the
computer so that the optical communication areas meet.
Optical Communication Area
• USB Communication: RTR-574 / 576
Connect the Remote Unit with a USB communication cable to the
computer.
If the screen does not change after connecting RTR-574 / 576:
• Do not connect more than one Remote Unit to your computer at one time.
• The USB driver may not have been installed correctly. Please see [Help for Unit
Recognition Failure], and check the USB driver.
4.
Enter the following information in the [Remote Unit Registration]
window.
19
USB
USB
USB