Unknown Id Job - Kyocera ECOSYS P5021cdn Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Unknown ID Job

Unknown ID Job

This specifies the behavior for handling the jobs sent with unknown or unsent login user names or User ID. If the User
Login is set to invalid and Job Accounting is set to valid, follow the procedure when the Account ID is unknown.
The setting items are as follows.
Item
Permit
Reject
1
2
The job is permitted to be printed.
The job is rejected (not printed).
Display the screen.
1
[Menu] key > [▲] [▼] key > [User/Job Account] > [►] key
2
Enter the administrator ID and select the [OK] key.
NOTE
Enter an ID consisting of between 1 and 16 numbers.
Select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the cursor left or right.
The factory default settings for the administrator ID is set as shown below.
ECOSYS P5021cdn/ECOSYS P5021cdw
ECOSYS P5026cdn/ECOSYS P5026cdw
3
Enter the administrator password and select the [OK] key.
NOTE
Enter a password consisting of between 0 (no settings) and 16 digits.
Select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the cursor left or right.
The factory default settings for the administrator password is set as shown below.
ECOSYS P5021cdn/ECOSYS P5021cdw
ECOSYS P5026cdn/ECOSYS P5026cdw
Configure the settings.
[▲] [▼] key > [Unknown ID Job] > [OK] key > [▲] [▼] key > [Reject] or [Permit] > [OK] key
Descriptions
Model Name
Model Name
7-21
Administrator ID
2100
2600
Administrator Password
2100
2600