General Problems Of Postscript - Konica Minolta bizhub pro 1200P User Manual

Troubleshooting
11.3

General Problems of PostScript

A PostScript Error message displays.
<Response>
A search can be made from [https://www.adobe.com/cfusion/support/in-
dex.cfm?event=membership&retur-
nURL=%2Fcfusion%2Fsupport%2Findex%2Ecfm%3Fevent%3Dportal%2
6loc%3Den%5Fus&loc=en_us].
A PostScript Error message displays when attempting to get a printout
from any computers are in use.
<Response>
There may be loose connections in the printing system. Recheck all of con-
nections.
A PostScript Error message displays when attempting to get a printout
from a specific application.
<Response>
Error conditions may exist in the application. Try to print out a simple test file.
If this also does not succeed, reinstall the application in question.
A PostScript Error message displays when attempting to get a printout
from a specific file.
<Response>
It is possible that the print setting for the file is wrong, that graphics con-
tained in the file are damaged, or that bad elements are contained in the file.
Find a print setting that does not cause any PostScript Error message to ap-
pear, and try to get a printout. If this fails, save the file as a new file.
Fonts cannot be downloaded.
<Response>
It is possible that [Spool Print Jobs in HDD before RIP] is set to [Enable] in
Printer Setting Menu on the copier's control panel.
Set [Spool Print Jobs in HDD before RIP] to [Disable], switch off the copier's
main power, wait 10 seconds or more, switch it back on, and then try down-
loading fonts again.
For details on how to download fonts, refer to the User's Guide that comes
with the fonts.
bizhub PRO 1200/1200P/1051 Printer
11
11-4