Konica Minolta bizhub pro 1200P User Manual page 231

PostScript PPD Printer Driver setting (Windows)
Wait Mode
Outputs the test print and checks the current setting from the control panel
of copier. Use this when printing a large volume document, such as multiple
sets of pages.
1
Open the file to be printed and select [File] - [Print] of application.
2
Click [Preferences] to open the
[Printing Preferences] window and
then click [Advanced].
3
Click [▼] besides the [Wait Mode] to display the list. Then select [Wait
Mode] or [Proof and Print] and click [OK] to close the [Advanced Op-
tions] window.
– Select [Wait Mode] to wait before printing the document to check
the current setting from the control panel of copier.
– Select [Proof and Print] to print the one copy as a test to check the
output and the current setting from the control panel of copier.
4
Click [OK] to close the [Printing Preferences].
5
Click [Print] to perform printing from the application.
– When the [Wait Mode] is selected, it stops without being printed.
– When the [Proof and Print] is selected, only one set is printed and it
stops.
On the copier's control panel, the Mode Check screen appears.
6
In case of [Proof and Print], [MACHINE] tab blinks on the right above
the copier touch panel screen. Press [MACHINE] tab.
Mode Check screen appears on the control panel of copier.
bizhub PRO 1200/1200P/1051 Printer
9
9-39