Configuring Your Computer For Mini-Vsat Broadband - KVH Industries TracPhone V7 User Manual

Configuring Your Computer for mini-VSAT Broadband

Follow the steps below to configure your computer for DHCP
addressing. This will allow your computer to communicate with the
modem via its Ethernet connection.
NOTE: If you wish to set up a wireless connection, set up and test a wired
Ethernet connection first. Then purchase a wireless access point (WAP),
connect it to the switch, and follow the wireless setup instructions provided
with the WAP.
IMPORTANT!
When setting up a wireless network, be sure to apply security
settings, such as encryption, to protect your network from outside
intrusion. If your network is not secure, outsiders within range of
your wireless network will be able to use your wireless connection
without your knowledge.
NOTE: KVH Technical Support fully supports the three operating systems
described here: Windows Vista
Windows Vista
Follow the steps below to configure a Windows Vista computer.
1. At the Windows Control Panel, double-click the
Network and Sharing Center icon. You can find the
Control Panel either through the Start menu or "My
Computer."
2. At the Network and Sharing Center window, double-
click the View Status link for the Ethernet connection
you are using for mini-VSAT Broadband.
™
, Windows XP, and Macintosh
TracPhone V7 User's Guide
Chapter 3 - Configuration
®
OS X.
35