Guarantee Information; Safety Devices - Rinnai GRANADA MkII Operating Information And Installation Instructions

1 SAFETY DEVICES
W Oxygen Depletion Sensor
This system turns the heater off if the oxygen level in the room falls below a pre-set level.
This can be caused by lack of ventilation, or using the heater in a room which is too small.
Before relighting ventilate the room, then follow the ignition procedure.
Annual cleaning is recommended, this should be carried out by Rinnai or our agent.
W Flame Failure Device
If the flame goes out during operation, the flame failure device cuts the gas off.
H Fan Switch
The fan switch has two speed settings, and an OFF position. This allows you to choose the best
conditions for maximum comfort. The heater may also be used with the fan off.
H Tilt Switch
If the heater is knocked over, the tilt switch will cut off the gas supply.
To restore the supply, stand the heater up and follow the ignition procedure.
The tilt switch may also operate if heater is jolted or picked up whilst in operation.
-3-