Rinnai Avenger 25 Operation Manual
Portable unflued gas convection heater
Hide thumbs
Also See for Avenger 25:
- Operation manual (24 pages) ,
- Operation manual (24 pages) ,
- Operation manual (22 pages)
Table of Contents
Advertisement
Portable Unflued Gas
Convection Heater
Operation Manual
This appliance shall be installed in accordance with:
This appliance shall be installed in accordance with:
• Manufacturer's Installation Instructions
• Manufacturer's Installation Instructions
• Local Regulations and Municipal Building Codes
• Local Regulations and Municipal Building Codes
This appliance must be serviced and repaired by an Authorised Person.
This appliance must be serviced and repaired by an Authorised Person.
To Suit Models
Avenger 25
Blaze 21
Dynamo 15
Enduro 13
All Rinnai gas products
are A.G.A. certified.
Advertisement
Table of Contents
Related Manuals for Rinnai Avenger 25
Summary of Contents for Rinnai Avenger 25
- Page 1 • Local Regulations and Municipal Building Codes • Local Regulations and Municipal Building Codes This appliance must be serviced and repaired by an Authorised Person. This appliance must be serviced and repaired by an Authorised Person. All Rinnai gas products are A.G.A. certified.
-
Page 2: Table Of Contents
CARE AND MAINTENANCE ....................16 AIR FILTERS ........................... 16 REMOVING FILTERS ........................16 SERVICE ............................16 TROUBLE SHOOTING CHECKLIST ....................17 ERROR CODES ..........................17 SPECIFICATIONS ......................... 18 GENERAL SPECIFICATIONS ......................18 WEIGHT AND MEASURES ......................18 CONTACT INFORMATION ....................21 Operation Manual Rinnai... -
Page 3: Regulatory Information
Rinnai Two Year Warranty - Terms and Conditions 1. During the 24 month period from date of purchase and subject to clauses 2 and 3 below, Rinnai New Zealand Limited ("Rinnai") will, at its own discretion, either replace or repair any defective product at no charge to the customer. -
Page 4: About Your Portable Convector Heater
DYNAMO ENDURO Control panel Gas inlet connection ON / OFF button Filter 1 Stops and operates the heater. Filter 2 Remote control receiver window Thermistor Louvre, warm air discharge 240v power cord Carry handle(s) Power cord tidy Operation Manual Rinnai... -
Page 5: Navigating The Control Panel
Off timer button Operates Timer programme 2. Operates the Off Timer (60 minutes). Timer 2 indicator Off timer indicator Indicates Timer 2 is in operation. Indicates heater is in Off Timer mode. Override button Operates the manual Override function. Rinnai Operation Manual... -
Page 6: Navigating The Remote Control
Avoid leaving the remote control in direct sunlight and do not place the remote control close to the louvres of the heater. Avoid getting the remote control wet, or dropping it. Operation Manual Rinnai... -
Page 7: Features
The heater will automatically come on and will continue to operate for a period of 60 minutes then automatically turn off. OFF TIMER This feature allows you to program the heater to operate for a period of one hour before it automatically turns off. Rinnai Operation Manual... -
Page 8: Important Points
DO NOT spray aerosols near this heater while it is in use. Most aerosols contain butane gas which can be a fire hazard if used near this heater when it is in use. Use of aerosols, paint, polishes etc. whilst this heater is in use may also cause unpleasant smells. Operation Manual Rinnai... - Page 9 When the heater is operated for the first time or after long periods of non use a slight odour may be emitted, this is normal. However if odours persist switch off the appliance and contact Rinnai. During peak operating periods the filters should be cleaned weekly, however if the Filter warning indicator illuminates, turn off the appliance immediately and clean filters before further use.
-
Page 10: Installation
“VENTILATION” on page 8 and the warning label located on the appliance. For further information regarding room ventilation contact Rinnai or your local gas authority. • DO NOT USE THIS APPLIANCE TO HEAT A BEDROOM, BATHROOM, TOILET, COMBINED LIVING/SLEEPING AREA OR SAUNA. -
Page 11: Checking Room Size
To determine if the intended room meets the minimum size requirements simply multiply the Height x Width x Depth. For example if the room dimensions are Length 5.3 metres, Width 5.0 metres and Height 2.4 metres then the volume would be 63.6 m³ and suitable for use with an Avenger 25. L e n... -
Page 12: How To Operate The Heater
Rooms may not arrive at the "SET" temperature due to the size and construction of the room, location of the appliance or external temperatures. NOTE If the appliance does not ignite then the actual room temperature may be higher than the pre-set temperature selected. Operation Manual Rinnai... -
Page 13: To Turn The Heater Off
Economy mode. To cancel Economy mode press the Economy button and the Economy indicator will go out to show that the economy mode has now been cancelled. Rinnai Operation Manual... -
Page 14: Timer Operation - Avenger, Blaze & Dynamo
To lock in the new Timer 1 on and off timer programs and to exit the Clock setting and Timer programming mode without altering the Timer 2 settings press the Set Times button three times, otherwise continue to "PROGRAMMING TIMER 2" on page 12. NOTE Operation Manual Rinnai... -
Page 15: Programming Timer 2
To cancel timer(s) operation press the associated timer button(s). The indicator will go out to signify that the heater is now operating under manual control. Rinnai Operation Manual... -
Page 16: Preheat
Off time setting is reached. If the ON/OFF button or the OFF button on the remote control are pressed the heater will be turned off and the timer programs will not operate. NOTE Operation Manual Rinnai... -
Page 17: Timer Operation - Enduro
NOTE The Off Timer and On Timers work independently of each other. However, if both timers are operating and the Delay On time period is 30 minutes, the Delay Off Timer will override the Delay On Timer. Rinnai Operation Manual... -
Page 18: Lock And Safety Devices
Tilt switch If the heater is knocked over, the tilt switch will cut the gas supply. The fan keeps cycling. Power failure In the event of a power failure or power cut, the gas valves will automatically close. Operation Manual Rinnai... -
Page 19: Care And Maintenance
WARNING SERVICE Rinnai recommend that this appliance and installation be inspected and serviced every 2 years. If the power supply cord or any other component of the heater are damaged, they must be replaced by Rinnai or a suitably qualified person. -
Page 20: Trouble Shooting Checklist
CARE AND MAINTENANCE TROUBLE SHOOTING CHECKLIST Use the following chart to help determine whether a service call is required, however if you are unsure about the way your heater is operating, contact Rinnai or your local agent. Fault Condition Possible Remedy... -
Page 21: Specifications
Supply Pressure Dimensions Weight (MJ/hr) (kPa) Model Burner Natural Natural (mm) (Kg) Rate Avenger 25 A = 610 (RCE 671 TR) High 25.0 24.0 B = 482 C = 239 Blaze 21 D = 202 (RCE 571 TR) High 21.0 21.0... - Page 22 Operation Manual Rinnai...
- Page 23 Rinnai Operation Manual...
-
Page 24: Contact Information
Fax: (09) 257 3899 109739 Rinnai has a Service and Spare Parts network with personnel who are fully trained and equipped to give the best service on your Rinnai appliance. If your appliance RC-671-42X04(00) requires a service, please call 0800 RINNAI. Rinnai recommends that this appliance be serviced every 2 years.