Panasonic BB-HGW700A Operating Instructions Manual page 91

Security Policy Database Registration
Up to 10 security policy database entries can be made.
Data Entry Field
Database Name
Entry
Pre-shared Key
IPv4 Settings
Destination IPv4 WAN
address
Destination LAN
network
Options Setup
IPv6 Settings
Destination IPv6 WAN
address
Destination LAN
network
Options Setup
IPsec (IPv4) Connection Example
Own LAN Network
192.168.0.0/24
[IPv4 Settings]
Enter "10.0.0.1" for the Destination IPv4 WAN address.
Enter "192.168.1.0", prefix length "24" for the Destination LAN network.
Enter a database name up to 10 alphanumeric characters.
Selecting Enable, enables the entered IPsec settings. When you do
not want to use IPsec select Disable. Even if Disable is selected the
entered settings will not be deleted.
Sets the pre-shared key. Enter between 8 and 64 alphanumeric
characters. The secret shared key used in IPsec is created based on
the pre-shared key, so do not let third parties know your pre-shared
key. This is in order to maintain communication security.
Sets the other party's WAN IPv4 address.
Set the destination's LAN network prefix and prefix length. Make
sure that this product's LAN side network is a different network from
the destination's LAN side network.
Sets detailed IPsec-related settings. (see page 94)
Sets the other party's WAN IPv6 global address.
Set the other party's LAN network prefix and prefix length. Set a
global prefix for the prefix. Also, make sure that this product's LAN
side network is a different network from the destination's LAN side
network. Please note that a link local address cannot be set.
Sets detailed IPsec-related settings. (see page 96)
Destination IPv4 WAN address
10.0.0.1
Destination LAN Network
192.168.1.0/24
[For assistance, please call: 1-800-272-7033]
Operating Instructions
91