Panasonic BB-HGW700A Operating Instructions Manual page 87

IPv6 Static Routing
This product allows you to set 4 stable gateways, as well as automatically selecting dynamic routing.
Therefore it is possible to build several networks working under this product, and set a flexible routing
system.
1.
Click Routing in IPv6 Options.
2.
Set Entry, Destination IPv6 Address, Gateway,
I/F and Metric, in IPv6 Static Routing.
3.
Click [Save].
• The restart window indicating that setup is
complete is displayed.
4.
Click [Restart].
Data Entry Field
Entry
Destination IPv6
Address
Gateway
I/F
Metric
Specifying Enable in this heading enables the static routing setting
set previously. Select Disable if you do not want to use static routing.
Even if Disable is selected the entered settings will not be deleted.
Enter the IPv6 address and prefix to be routed.
Set the IPv6 address of the next router on the route after this
product.
Set the I/F where the gateway exists.
Set the number of hops to be made to reach the Destination IPv6
Address. Enter a number between 1 and 255.
[For assistance, please call: 1-800-272-7033]
Operating Instructions
87