Panasonic BB-HGW700A Operating Instructions Manual page 53

Note
The KX-HCM250 and KX-HCM270 wireless LAN headings correspond to the following
headings.
40 bit password entry
128 bit password entry
40 bit key entry
128 bit key entry
Data Entry Field
Encryption Select from Disabled, WEP, and WPA-PSK/WPA2-PSK. The method with
Settings the highest security is WPA-PSK/WPA2-PSK, followed by WEP, then
Disabled. (Factory Default is WEP.)
WEP Key Safety increases from 64 bit to 128 bit to 152 bit, but as the safety increases
the data speed is reduced slightly. In Windows XP 64 bit is displayed as 40
bit(10 digits), and 128 bit is displayed as 104 bit(26 digits).
(Alpha-numerical 13 characters 128 bit in WEP Key 1 is selected in factory
default.)
Note
When modifying the encryption setup of this product after a wireless camera etc. has been registered
automatically, it is necessary to match the wireless camera's settings.
<When [WPA-PSK/WPA2-PSK] is selected>
3.
For the Network key, enter between 8 and 63
alphanumeric characters, or 64 hexadecimal
characters.
Notes
• Setup details are displayed as * (asterisks) after restarting this product. Always take a
memo of your setup details and keep it in a safe place.
• Set the same network key for wireless devices connected to this product. See page 54 for
details about the data entry fields.
• The renewal interval is only applicable when AUTO or WPA-PSK(TKIP) is selected.
4.
Set the Renewal interval and Data encryption.
5.
Click [Save].
[For assistance, please call: 1-800-272-7033]
5 alpha-numerical characters 64 bit
13 alpha-numerical characters 128 bit
10 hexadecimal characters 64 bit
26 hexadecimal characters 128 bit
Operating Instructions
53