Panasonic BB-HGW700A Operating Instructions Manual page 113

Headings Displayed
No.
Timestamp
Event
Client (IP Address, Port)
Protocol
External Port
Connection Log
The connection, disconnection and authentication logs during PPPoE or DHCP connection are
displayed. You can check the connecting IP address in the connection log. 100 logs can be displayed
on 1 page and 400 can be recorded in total. When there are more than 100 logs, select the page
number at the bottom of the page and search for the required log.
1.
Click [Log] on the setup page.
2.
Click [Display] Connection Log.
This is the log number. Numbers are attributed from the most recent.
The time when this product performed the port operation is
displayed. The time is calculated based on the PC's clock. If the time
looks incorrect, adjust your clock's settings.
The content of the port operation is displayed. The message
displayed is one of the following:
• [Port addition]: Port was added.
• [Port addition failure]: Port was not added.
• [Port removal]: Port was deleted.
• [Port removal (by user operation)]: Port was deleted by the user.
• [Port removal failure]: Port was not deleted.
• [All port removal (by user operation)]: All ports were deleted by
the user.
• [Auto port removal (by user operation)]: The time set in Automatic
deletion of UPnP port mapping has passed.
• [Auto port removal (by application setting)]: The time specified by
the application in use has passed.
• [Port addition failure (only permanent)]: Port was not added.
• [Port addition failure (require same port for internal/external)]:
Port was not added.
The client side's IP address and port number in the specified port
information is displayed.
The protocol for the specified information is displayed. TCP or UDP
is displayed.
The external (WAN side) port number in the specified port
information is displayed.
[For assistance, please call: 1-800-272-7033]
Operating Instructions
113