Using Wireless - Panasonic BB-HGW700A Operating Instructions Manual

Operating Instructions
3.1.7

Using Wireless

The wireless setup page allows you to perform settings to connect to wireless LAN and also perform
security settings. The wireless LAN uses radio waves in the same way as a TV or transceiver does,
selects a data channel, and sends/receives data.
The three data sending modes, "802.11b", "802.11b/g", and "802.11g only", each have differing bands
and speeds. The default is all "802.11b/g". Also, it is possible to connect 2 or more wireless devices,
by naming (SSID) a network and using the same SSID and data channels for all of them. Set the same
SSID and data channel
SSID : EARTH
Data Channel:6
*
It is possible for wireless devices connected to this product with the same SSID to send/receive
data by searching the data channel automatically.
Note
The default is set as the device-specific SSID and the 13 character 128 bit encryption key. The default
SSID and the 13 character 128 bit encryption key are displayed on the rear of this product.
48
*
for all devices on the wireless LAN network.
SSID : Panasonic
Data Channel:7
Unable to Connect
SSID : Panasonic
Data Channel:7
SSID : Panasonic
Data Channel:7